AMV Scientific Co.

A 2000 kN Plate Type Compression Testing Machine is used to determine the compressive strength of concrete cubes, cylinders, and blocks. It features a heavy-duty loading frame with steel plates, smooth load application, and high accuracy. Suitable for construction sites and laboratories for reliable strength testing.

Compression tests are performed on universal testing machines, also known as compression testing machines. These machines consists of a single or dual column frame equipped with a load cell, testing software, and application-specific platens and accessories.

The Tamping Rod is a round, Straight Steel Rod used with concrete Cylinder Moulds, Slump Cones, and unit weight tests. Measures 16 mm diameter by 600 mm length. Both ends are rounded to a hemispherical tip.

Semi-Automatic Compression Testing Machine, split, and flexural strengths are determined using machines. These tests are often conducted on materials having a high compressive strength but a low tensile strength, in which the specimen is subjected to increasing compressive pressures until the machine detects failure.

Rapid Moisture Tester is a device used to quickly determine the moisture content of a substance, including sand, soil, fine aggregate, or other construction materials. This device utilizes the rapid drying method, allowing for on-the-spot measurements of moisture levels.

AMV scientific offer a comprehensive range of Civil Engineering Lab Equipment, which are widely used in Schools, Colleges and Universities in Delhi, India.

AMV scientific is an essential tool for civil engineering lab equipment manufacturers, suppliers and exporters in Delhi, India of springs to ensure that their products meet the required standards. We are a top civil engineering lab equipment manufacturers, exporters, and suppliers in Delhi, India.

Bulk Density Bucket Determines Bulk Density or unit weight of aggregates.

The Speedy Moisture Meter consists of a pressure vessel with clamp for sealing cap, capacity is 20 gms. Rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0-25% x 0.25% on the wet weight basis, an electronic balance for weighing the sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush, and a set of 4 steel balls for thorough mixing. Complete in a highly polished wooden carrying case with a handle.

Marsh cone test is a test carried out for discovering the optimum dosage of plasticizers and superplasticizers for various types of cement.

An Auto-Level is a versatile tool that is essential for meeting a wide range of construction engineering and measurement requirements. With its automatic compensation function, it ensures precise and accurate readings, improving working efficiency significantly. By eliminating human errors, it enhances the quality of measurements and reduces the chances of mistakes. Whether it is for leveling ground, setting grade, or measuring elevations, an Auto-Level is a reliable instrument that can streamline construction tasks, making them more efficient and error-free. Its advanced features make it an indispensable tool for any construction site, where accuracy and precision are paramount.

This multi-purpose digital unit, fit with cooler unit and recirculating water system, is used to condition in water asphalt specimens for Marshall and Indirect tensile test. The EN 12697-23 covering the Determination of the indirect tensile strength of bituminous mixtures, prescribe a water conditioning temperature of 5°C or from 5 to 25°C which are obtainable with a cooling system. All the other standards require conditioning temperatures from 25 to 60 °C. This unit can also be used for many applications either for Asphalt or for Cement testing for curing in water cement specimens 40x40x160 mm, and for storing the hydrated samples at a temperature of 20°C (EN 196-8). Internal surfaces are polished stainless steel with a sheet steel insulated outer case. The cooler unit is located under the water bath. Complete with re-circulating unit for temperature uniformity.

AMv scientific vibrating table will improve your products surface finish while helping to improve your profitability and maximize your production while reducing your labor expense and production time. AMv scientific Vibrating Tables are designed to meet the precast concrete needs. Quality components, materials, and construction methods provide a rugged piece of equipment that you will rely on for years to come.

The Vibrating Table is used for compaction of cement concrete cubes and cylinders by vibration. The load carrying capacity of the table is about 150 kg. The table is supported on rubber mounting springs and the housing of the eccentric is fitted below the table top.

Index Apparatus (Flow Coefficient of Fine Aggregates) apparatus is used to obtain information about the shape and the angularity of grains of fine aggregates.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

Double walled inner chamber in stainless steel outer chamber in mild steel temperature range Ambient to 100° C controlled by capillary thermostat. Accuracy ± 1° C operated on 230V A.C. Single Phase. These baths are suitable for washing Marshall specimen. Lid is made up of stainless steel with a hole for glass thermometer to penetrate.

Water Bath Range

• 12″lengthx 9″ width x 7″ height having rating 750 W.
• 18″length x 12″ width x 7″ height having rating 1500 W.

Light weight Outer body P.C.R.C. Sheet Duly Painted/Powder Coated, having Grooved refractory chamber to support Kanthal heating element on ¾ sides as per requirement Temp. range 1200º C, working 1150º C fitted with high density ceramic fibre insulation to avoid heat/temp. loss, Fitted with Digital Temp Controller.

Used for talking measuring settlements of Soil, used in Marshall Stability test apparatus, CBR Test Apparatus, Unconfined Compression Test Apparatus to measure de-fomalities, strains, displacements in general. Range 0-5mm x 0.002mm, 0-10mm x 0.01mm, 0-25mm x 0.01mm, 0-50mm x 0.01mm

High vacuum consist of a metallic casing having Cylindrical bore accommodating an eccentrically mounted slotted rotor bearing, a pair of Vanes in the slots forced a part and pressed against the wall of the casing of the spring. With the rotor these vanes slide along the wall Casing wiping before them the air which has entered the apparatus via the suction orifice. The air is finally forced out of the pump by the Vanes through the oil immersed exhaust valve. The pumps are made in either single or double stages, the pumps are electrically operated.

V belts driven and mounted on iron base plates. Experienced and research in the field, strict supervision by trained experts and Quality contact by qualified and experienced engineers valve. The pumps are made in either single or double stages, the pumps are electrically operated. V belts driven and mounted on iron base plates. Experienced and research in the field, strict supervision by trained experts and Quality contact by qualified and experienced engineers ensure that every pump is reliable technically proved to give trouble free along Service.

Thermometers Range

• Spatula, 100mm blade with wooden handle
• Spatula, 150mm blade with wooden handle
• Spatula, 200mm blade with wooden handle
• Spatula, 300mm blade with wooden handle
• Chattaway spatula. 125mm long. Made up of Stainless Steel sheet

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

A compression testing machine is a universal testing machine (UTM) specially configured to determine a material's strength and deformation behavior under compressive (pressing) load. A typical machine for compression tests consists of a load cell, a crosshead(s), compression test tools, electronics, and a drive system.

bitumen extractor, particularly a centrifugal extractor (the most common type for quantitative bitumen content determination), vary based on whether it is a hand-operated, electrically-operated, or fully automatic model. However, there are several key standard specifications that apply, often referencing international standards like ASTM D2172 and AASHTO T-164.

A pycnometer bottle, also known as a specific gravity bottle, is a laboratory device used to determine the density or specific gravity of liquids and fine-grained materials like soil, commonly used in scientific and engineering fields. 

AMV scientific offer a comprehensive range of Civil Engineering Lab Equipment, which are widely used in Schools, Colleges and Universities in Delhi, India. 

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

Double walled outer M.S. Sheet duly powder coated. Inner Aluminium/ Stainless Steel with 2nos. adjustable shelves duly perforated. Having heavy duty M.S. Stand. The door is an impressive structure having glass window & sealed by Rubber Gasket. Gap between the walls is filled with glass.

Consist of Temp. controller Le. Thermostat for dry temp. Control, Wet Temp. controller Energy Regulator, Mains, Dry, Wet Indicator Humidity Indicator, Mains, Illumination Switch. Humidity controlled by Imported Humidistate placed inside the chambar. Supplied with Hygrometer/ wet and dry thermomter to check exact Humidity inside the chamber. The Temperature is recorded on the “L” shaped prismatic Thermometer fitted at the front of the cabinet. The water tank is provided at the bottom & the steam is circulated by water pump/motor fitted at the top of the chamber.

Most suitable for Labs, Pharmaceuticals, Chemicals Glass Plants Etc. Useful for heating inflammable liquids electric heating net is hard Knitted from glass yarn (without any joint) & for durability &stands temp. Up to 350° C body of mantle is spun one piece from non rusting Alum (duly stove 1powder coated) mantles are logged with special grade mineral wool. Most suitable to work on 230 V A.C. supply.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.              

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.