AMV Scientific Co.

Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality range of Slump Test Apparatus.

The Bishope Pore Pressure Apparatus consists of a panel for wall mounting on which are fitted 1.0 to 10kgManom/cm sq x 0.1kg cm. sq. a pressure gauge, bourdon tube type 15 cm diameter: Glass u-tube manometer for measuring low positive pore pressures negative pore measures and checking zero error of pressure gauge. It is provided with a mercury trap (mercury supplied at extra cost.) Null indicator made out of clear transparent Perspex with mercury trap and cursor to indicate the mercury level.

Burette: 50ml burette for measuring the volume change in the soil specimen. Pressure pump fitted with four sleeve packed valves, operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. Copper coil and water reservoir is fitted on board with complete stand assembly. The unit is tested against leaks up to 10kg/cm sq.

This mould is the same used for the Expansion of Portland cement with the High pressure autoclave, conforming to ASTM C151 and ASTM C490.

Two gang prism mould 25x25x285 mm complete with contact points. Gauge length 250mm, total length 285 mm.

Used for accelerated expansion test on mortar prisms to UNI 11504. Three gang prism mould 25x25x280 mm complete with contact points. Gauge length 250mm, total length 280 mm.

Used to produce the mortar specimens for compression and flexural tests. Made from special alloy steel, they are proposed in two version:

• Standard having a minimum surface hardness of HV200 and
• Heavy duty having a minimum surface hardness of HV400 which is recommended by the EN standards. Furthermore, this model is surface protected by a rust inhibitor treatment and is supplied complete with traceable certificate of conformity and identified by a serial number.
• Both models can be fit with the type B measuring pegs for determining the coefficient of thermal expansion conforming to EN 1770.

Pulverizer is Designed for grinding materials to produce fine mesh samples Ideal for use in Cement and Chemical Industries.

AMV scientific offer a comprehensive range of Civil Engineering Lab Equipment, which are widely used in Schools, Colleges and Universities in Delhi, India.

AMV scientific is an essential tool for civil engineering lab equipment manufacturers, suppliers and exporters in Delhi, India of springs to ensure that their products meet the required standards. We are a top civil engineering lab equipment manufacturers, exporters, and suppliers in Delhi, India.

This version is used for the determination of linear shrinkage of cement mortars (EN 12617-4). The same mould can be used for testing grouts conforming to EN 12808-4 replacing the standard plugs with the mould and placing two 15x40x160 mm plastic inserts inside each compartment. See accessories. Three gang mould, individually tested with certified instruments. Made of special alloy steel, minimum hardness HV200. The shrinkage measurement has to be done with the Length comparator with the .

This version, conforming to UNI 6687, slightly differ from other version and it is used for the same determination.

Capping Set (Horizontal) IS:516-1959 For capping 100 mm dia x 200 mm high cylindrical specimens in the field or in the laboratory.

Capping Set (Vertical) is basically used in construction Laboratories is because It is essential that the ends of the concrete cylinder specimens are flat and parallel when conducting a compressive strength test.